Suspension (Air Suspension)

Upper Control Arm

Removing






- Suspension strut (air suspension), removing. Refer to => [ Air Suspension Strut ] Air Suspension Strut.

- Disconnect connections - 1 and 2 -, remove upper control arm.

Installing






Installation is the reverse of removal, with special attention to the following:

- Tighten the connections - 1 and 2 - by hand.

- Set dimension - A -.






A = 155 mm

- Tighten connections - 1 and 2 -.

Tightening specifications, refer to => [ Air Suspension Strut, Upper Control Arm and Level Control System Sensor Overview ] Front Axle Overview

- Suspension strut (air suspension), installing, refer to => [ Air Suspension Strut ] Air Suspension Strut.