Internal Padding

Internal Padding

Removing






- Remove the center armrest with the pass-through cover. Refer to => [ Center Armrest, Pass-Through ] Center Armrest, Pass-Through.

- Release the clips - arrows -

- Remove the internal upholstery - 1 - opposite the center armrest.

- While removing, swing the internal padding upward at the same time. The retaining hooks - 2, 3 and 4 - will disengage from their retainers - 5 and 6 - and out of the opening - 7 -.

- Remove the internal upholstery from the center armrest with the pass-through cover - 8 -.

Installing

Install in reverse order of removal. Note the following:

- Fold the internal upholstery - 1 - down and guide the retaining hooks - 2, 3 and 4 - into the retainers - 5 and 6 - and into the cut-out - 7 -.

- Press the bottom side of the internal upholstery onto the clips - arrows - on the pass-through cover.

- If the internal upholstery cannot be pressed on, carefully press the clips arrows in using a screwdriver until the upholstery engages in retainer.