Diagram 39/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Humidity sensor, Comfort system central control module, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G355 - Humidity sensor Locations Pass Compartment A/C Components

J393 - Comfort system central control module Overview of Control Modules in Rear part of vehicle - Sedan (4-door models)

ST1 - Fuse panel 1

SC1 - Fuse 1 (on fuse panel C) Overview Of Fuses

ST2 - Fuse panel 2

SC9 - Fuse 9 (on fuse panel C) Overview Of Fuses

T8c - 8-pin connector

T17f - 17-pin connector, brown Overview Of Connector Stations

T32c - 32-pin connector Control Modules in Right Luggage Compartment

T46s - 46-pin connector Overview Of Connector Stations

Y7 - Automatic dimming interior rearview mirror

(277) - Ground connection 3 (in interior wiring harness)

(639) - Ground connection on left A-pillar Overview of Ground Connections (4-door Models (Sedan))

(B398) - Comfort system CAN bus high connection 2 (in main wiring harness)

(B401) - Comfort system CAN bus high connection 5 (in main wiring harness)

(B407) - Comfort system CAN bus low connection 2 (in main wiring harness)

(B410) - Comfort system CAN bus low connection 5 (in main wiring harness)

(B528) - LIN bus connection 1 (in main wiring harness)

* - Refer to applicable wiring diagram

*2 - Through April 2009

*3 - Refer to applicable wiring diagram for fuse positions

*4 - From May 2009

Previous Diagram 39/9 (Tracks 99-112)