Diagram 121/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Interior rearview mirror, Automatic high beam assist control module, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

EX5 - Interior rearview mirror

J393 - Comfort system central control module Overview of Control Modules in Rear part of vehicle - Sedan (4-door models)

J533 - Data bus on board diagnostic interface Overview of Control Modules in Interior of Vehicle

J844 - Automatic high beam assist control module Headlamp Assistant, Humidity Sensor and Lane Assist Overview Locations

MX5 - Left tail lamp 2

T8c - 8-pin connector

T17c - 17-pin connector, black Overview Of Connector Stations

T17p - 17-pin connector Control Modules in Right Luggage Compartment

T20d - 20-pin connector Locations

Y7 - Automatic dimming interior rearview mirror

(B477) - Connection 13 (in main wiring harness)

(B665) - CAN bus extended high connection 1 (in instrument panel wiring harness)

(B666) - CAN bus extended low connection 1 (in instrument panel wiring harness)

(B668) - CAN bus extended high connection 2 (in main wiring harness)

(B669) - CAN bus extended low connection 2 (in main wiring harness)

* - Only for vehicles with lane assist

*2 - Only for vehicles with high beam assist

*3 - Refer to applicable standard equipment wiring diagram

*4 - Only for vehicles without high beam assist

Previous Diagram 121/2 (Tracks 1-14)

Next Diagram 121/4 (Tracks 29-42)