Wheel Alignment Specified Values

Wheel Alignment Specified Values

Front and All Wheel Drive

Specifications valid for all engine versions






* Wheel stop on outer wheel is reduced by this amount. It can also be indicated negatively in alignment computer, depending on manufacturer.






* Wheel stop on outer wheel is reduced by this amount. It can also be indicated negatively in alignment computer, depending on manufacturer.











Calculating the camber adjustment value:

camber adjustment value = -43' + [(vehicle height left + vehicle height right) : 2] - 391

• 1' camber = 1 mm vehicle height

The camber values are defined in the following table based on the vehicle heights at the front axle.






Additional vehicle data for vehicles with front and all wheel drive:

This additional vehicle data only serves for a faster diagnosis in the case of accidents.

Specified values valid for all engine versions.