Gears, Shafts

Fastener Tightening Specifications






ATF Oil Pan, Tightening Specification and Sequence






- Tighten the bolts in two stages as described below.

- Install the bolts - arrows - hand-tight.

- Tighten the bolts - 1 through 15 - diagonally to 10 Nm and in steps.

Mechatronic, Tightening Specification and Sequence






- Tighten the bolts to 10 Nm in the following sequence: - 1 to 6 -.

Circuit Board 1 - Tightening Specification and Sequence






- Tighten the bolts to 3 Nm in the following sequence: - 1 to 5 -.

Circuit Board 2 - Tightening Specification and Sequence






- Tighten the bolts to 3 Nm in the following sequence: - 1 to 5 -.

Transmission Intermediate Housing to Transmission Housing - Tightening Specification and Sequence






• Replace the bolts.

- Tighten bolts in 2 stages as follows: