Wiper Arm

Wiper Arm

Special tools, testers and auxiliary items required

• Puller (T10369)

Removing

- Turn on the ignition.

- Activate the "rear wipe" and let the wiper arm run to the end position.

- Turn off the ignition and remove the ignition key.

- Carefully expand the cap - arrows - and remove it.






- Carefully pull off the nozzle - 2 -.






- Loosen the nut - 1 - one turn.

- Place an M6 nut - 4 - on the nut.






- Position the (T10369/1) on the wiper arm - 1 - as illustrated.

- Position the thrust piece - 2 - on the wiper axis.

- Rotate the bolt - 3 - clockwise until the wiper arm is removed from the axis.

- Remove the nut completely and remove the wiper arm.

Installing

Install in reverse order of removal, observing the following:

- Adjust the wiper arm. Refer to => [ Wiper Arm, Adjusting ] Wiper Arm, Adjusting.