MMI CD Changer (R41)

MMI CD Changer (R41)

Special tools, testers and auxiliary items required

• Radio Removal Tool (T10057)

• Fiber Optic Pliers Repair Set (VAS 6223)

• Protective Cap for Cable Connector (VAS 6223/9)

- If the control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault Finding".

Use the vehicle diagnostic tester.

- Turn off all electrical consumers.

- Remove the key.

Removing

- Open the glove compartment.

- Insert two clips on (T10057) in release slits on CD changer until they engage. Points on the grip eyelets of tool face outward.






- Remove CD changer from mounting frame.

- Disconnect all of the connectors from the CD changer.

- Connect the (VAS 6223/9) - 1 - to the connector for the MOST-Bus - 2 -.






- Remove (T10057) , to do this push locking tabs on CD changer.

- Unclip the front trim piece from the CD changer.

Installing

- Connect all harness connectors.

- Slide CD changer into mounting frame until it engages.

Assembly overview, refer to => [ MMI Overview ] MMI Overview