Moldings and Trim Overview

Moldings and Trim Overview

• The vehicle must reach room temperature before installing bonded moldings or trim.

• All adhesion surfaces must be free of dust and grease.






1 Clip

• For attaching the stone chip protective molding.

2 Right Stone Chip Protective Molding

• Removing and installing, refer to => [ Stone Chip Protective Molding ] Stone Chip Protective Molding.

3 Right Sill Panel

• Removing and installing, refer to => [ Sill Panel Trim ] Sill Panel Trim.

4 Nut

• 2.5 Nm

• Quantity 11

5 Convertible Top Compartment Cover Trim Molding

• Removing and installing, refer to => [ Convertible Top Compartment Cover Trim Molding ] Convertible Top Compartment Cover Trim Molding.

6 Left Sill Panel

• Removing and installing, refer to => [ Sill Panel Trim ] Sill Panel Trim.

7 Clip

• For attaching the stone chip protective molding.

8 Left Stone Chip Protective Molding

• Removing and installing, refer to => [ Stone Chip Protective Molding ] Stone Chip Protective Molding.