Convertible Top Compartment Cover Trim Molding

Convertible Top Compartment Cover Trim Molding

• The vehicle must reach room temperature before installing bonded moldings or trim.

• All adhesion surfaces must be free of dust and grease.

Removing






- Open the convertible top until the displayed position of top and convertible top compartment cover is reached.

- Remove the nut - 3 -.






- Lift the trim strip molding - 1 - and disconnect the connectors - 4 - and - 5 -.

- Remove the trim molding from the convertible top compartment cover - 2 -.

Installation

• Tightening specifications, refer to=> [ Moldings and Trim Overview ] Moldings and Trim Overview.

To install, perform the steps used in removal in reverse order.