Front Wheel Housing Liner

Front Wheel Housing Liner

• The front wheel housing liner is made of two pieces and can be removed separately.






1 Front Part of Wheel Housing Liner

• Removing

• Driveshaft cover, removing

• Press in front wheel accordingly.

• Remove the bolts on the lower wheel housing liner.

• Loosen the retainer on the clips, for example, using a small screwdriver, and slide the clip sideways off the retaining pins.

- Disengage wheel housing liner from fender and pull downward and out.

• Installing Reverse order of removal.

2 Bolt

• 1.5 Nm

3 Clip

• Quantity 7

4 Wheel Housing Liner

Driveshaft Cover






1 Front Part of Wheel Housing Liner

2 Longitudinal Member

3 Driveshaft Cover

4 Rear Part of Wheel Housing Liner

5 Nut

• 2 Nm