Floor Covering

Floor Covering

Removing

- Remove the front seat:

• Standard seat and Sport seat (manual), refer to => [ Manual Standard Front Seat ] Manual Standard Front Seat.

• Standard and sport power seat, comfort seat and super sport seat, refer to => [ Power Standard Front Seat ] Power Standard Front Seat.

- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Remove center console. Refer to => [ Center Console ] Center Console.

- Remove the air ducts on the center tunnel.

- Remove the center console bracket and lower the shift mechanism. Refer to => [ Center Console Bracket ] Center Console Bracket.

- Remove the lower A-pillar trim. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Remove the sill panel strips. Refer to => [ Sill Panel ] Sill Panel.

- Remove the left and right front belt anchors. Refer to => [ Front Belt Anchor ] Front Belt Anchor.

- Disengage the floor covering at brackets - 1 - and - 2 -.






- Pull the floor covering - 3 - back.

• Make sure the floor covering does not tear at the openings.

- Fold up and remove the floor covering.

Installing

- Fold the floor covering lengthwise and lay it in the vehicle.

- First slide the floor covering forward until the air duct and shift mechanism openings are aligned.

- Then attach the floor covering at brackets - 1 - and - 2 -.

Further installation is performed in the reverse order of removal.