Seat Height Adjustment Handle

Seat Height Adjustment Handle

• The seat height adjustment handle can be replaced with the front seat installed.

Special tools, testers and auxiliary items required

• Hook (3438)

Removing






• Remove the seat height adjustment handle - 1 - as described. Do not drive it off the lever - 2 -.

• If the tab - arrow - is damaged when removing the seat height adjustment handle, the handle cannot be reinstalled. It must be replaced.

- Pull the seat height adjustment handle - 1 - as far up as possible and hold it in that position.






- Carefully pull the seat height adjustment handle slightly away from the front seat.

- Place the (3438) between the seat height adjustment handle and the trim - 2 -.

- Unlock the release - 3 - using the (3438) and at the same time, pull the seat height adjustment handle in - direction of arrow - from the lever.

Installing






Installation is reverse of removal, but note the following:

- Inspect the strap - arrow -.

• If damage can be seen on the tab, installed a new seat height adjustment handle - 1 -.

- Make sure the tab in the seat height adjustment handle fits correctly into the notch on the lever.