Bearing Bushing and Guide Pin FN-3 Brake, 1LT

Bearing Bushing and Guide Pin FN-3 Brake, 1LT

• When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!

Removing

- Loosen the brake caliper at the pins - 12 -.






- Remove the brake caliper.

• Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

- Remove the bushing from the brake caliper.

Installing

Installation is performed in reverse sequence.

- Use new guide pins.