Exhaust System: Specifications

Fastener Tightening Specifications

Left Exhaust Manifold, Tightening Specifications and Sequence

• Replace the nuts.

• Coat the thread on the nut with hot bolt paste; for the correct hot bolt paste, refer to the Parts Catalog.

- Tighten the nuts in 3 steps according to the tightening sequence:

Right Exhaust Manifold, Tightening Specifications and Sequence

Secondary Air Combination Valve Heat Shield - Tightening Specification

- Tighten the heat shield bolts - arrows - - 1 - to 9 Nm.

Individual Catalytic Converter Mounting Components

1. Nut - 23 Nm

2. Spacer sleeve

3. Pressure spring

4. Washer

5. Bolt

6. Bolt - 23 Nm

7. Spacer sleeve

8. Adjusting buffer

9. Tab

10. Bolt - 23 Nm

11. Bracket