Diagram 8/22 (Tracks 281-294)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module Overview of Control Modules in interior of vehicle

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

ST2 - Fuse panel 2

SD4 - Fuse 4 (on fuse panel D) Overview Of Fuses

SD5 - Fuse 5 (on fuse panel D) Overview Of Fuses

T20d - 20-pin connector Locations

T32f - 32-pin connector Instrument Cluster Control Module -J285-

T46s - 46-pin connector Overview Of Connector Stations

(81) - Ground connection 1 (in instrument panel wiring harness)

(135) - Ground connection 2 (in instrument panel wiring harness)

(687) - Ground connection 1 on center tunnel Locations

* - Refer to applicable wiring diagram for fuse positions

*2 - Refer to applicable wiring diagram

Previous Diagram 8/21 (Tracks 267-280)

Next Diagram 8/23 (Tracks 295-308)