Cylinder Head, Valvetrain - Fastener Tightening Specifications

Fastener Tightening Specifications






Left Cylinder Head Cover - Tightening Specification and Sequence






- Tighten the bolts to 9 Nm in the following sequence: - 1 to 12 -.

Right Cylinder Head Cover - Tightening Specification and Sequence






- Tighten the bolts to 9 Nm in the following sequence: - 1 to 12 -.

Cylinder Head - Tightening Specification and Sequence






• Replace any bolts that were tightened with an additional turn.

- Tighten the bolts in 4 steps and in the sequence shown:






Oil Dipstick Guide Tube - Tightening Specifications






- Tighten the bolt - arrow - to 9 Nm.

Left Timing Chain Cover, Tightening Specifications and Sequence






• Replace any bolts that were tightened with an additional turn.

- Tighten the bolts in 2 steps and in the sequence shown:






Right Timing Chain Cover, Tightening Specifications and Sequence






• Replace any bolts that were tightened with an additional turn.

- Tighten the bolts in 2 steps and in the sequence shown:






Lower Timing Chain Cover, Tightening Specifications and Sequence






• Replace any bolts that were tightened with an additional turn.

- Tighten bolts in 8 stages as follows:






Camshaft Guide Frame Tightening Specifications and Sequence






• The guide frame for the left cylinder head camshaft is shown in the illustration. The right cylinder head is identical.

• Replace any bolts that were tightened with an additional turn.

- Tighten the bolts in 3 steps and in the sequence shown: