Bumper Cover Overview

Bumper Cover Overview






1 Decorative Trim Strip

• Audi S5 only

• Removing and installing, refer to => [ Trim Molding, Audi S5 ] Trim Molding, Audi S5

2 Bolt

• 1.5 Nm

• Quantity: 9

3 Bumper Cover Lower Section

• Removing and installing, refer to => [ Bumper Cover Lower Section ] Bumper Cover Lower Section

4 Bolt

• 1.5 Nm

• Quantity: 2

5 Rear Bumper Cover

• Removing and installing, refer to => [ Bumper Cover ] Bumper Cover

6 Left Rear Parking Aid Sensor (G203)

7 Bolt

• Quantity: 3

• Tightening sequence, refer to => [ Side Mount and Bumper Cover Locking Mechanism - Tightening Specifications and Sequence ]

8 Side Mount

• For the bumper cover

• Removing and installing, refer to => [ Bumper Cover Side Mount ] Bumper Cover Side Mount

9 Clip Nut

• Quantity: 3

10 Bumper Cover Locking Mechanism

• Clamping screw tightening specification 2.5 Nm.

• Removing and installing, refer to => [ Bumper Cover Locking Mechanism ] Bumper Cover Locking Mechanism

11 Clip Nut

• Quantity: 2

12 Bolt

• Quantity: 2

• Tightening sequence, refer to => [ Side Mount and Bumper Cover Locking Mechanism - Tightening Specifications and Sequence ]

13 Nut

• 4 Nm

14 Left Rear Center Parking Aid Sensor (G204)

15 Right Rear Center Parking Aid Sensor (G205)

16 Nut

• 4 Nm

17 Right Rear Parking Aid Sensor (G206)

18 Cover

• For the towing eye

19 Bolt

• 1.5 Nm

• Quantity: 3

Side Mount and Bumper Cover Locking Mechanism - Tightening Specifications and Sequence





- Tighten the bolts in a - 1 to 5 - sequence to 1.5 Nm.