Front Backrest Overview

Front Backrest Overview






1 Seat Pan

2 Screws

• Self-Locking

• Always replace if removed

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 33 Nm

3 Backrest

• Removing and installing, refer to => [ Front Backrest ] Front Backrest

4 Headrest

• Removing and installing, refer to => [ Headrests with Locking Mechanism ] Headrests With Locking Mechanism

5 Handle

• With bracket (entry assistance)

• Removing and installing, refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle With Bracket

6 Entry Assistance Trim

• Removing and installing, refer to => [ Entry Assistance Trim ] Entry Assistance Trim

7 Wiring Harness

• Running from the side airbag to the connector station.

• Depending on optional equipment, there may be more wiring harnesses, such as for backrest heating, lumbar support

8 Cables

• With entry assist

• Quantity: 2

• Entry assistance release cable A, removing and installing => [ Entry Assistance Release Cable A ] Entry Assistance Release Cable A

• Entry assistance release Cable A, adjusting => [ Entry Assistance Release Cable A, Adjusting ] Entry Assistance Release Cable A, Adjusting

• Entry assistance release Cable B, removing and installing => [ Entry Assistance Release Cable B ] Entry Assistance Release Cable B

• Entry assistance release cable B, adjusting => [ Entry Assistance Release Cable B, Adjusting ] Entry Assistance Release Cable B, Adjusting

Tightening Specification, Retaining Plate for the DVD Player





- Tighten the retaining plate screws - 2 - to 6 Nm.

Tightening Specification, DVD Socket





- Tighten nut - 2 - to 0.4 Nm.