Seat Angle Adjustment Handle

Seat Angle Adjustment Handle

• Removal and installation can be performed with the front seat installed.

Removing






- Remove tunnel side trim panel. Refer to => [ Trim, Sill Side ] Trim, Sill Side.

- Pry the handle - 2 - off the seat angle adjuster - 1 -.

Installing






Install in reverse order of removal. Note the following:

- Replace the clip on the seat height adjustment handle. Note the installation position.

- Make sure the seat height adjustment handle engages correctly with the clips.

• The springs - arrows - (quantity: 2) on the clip - 2 - must be on the inner side of the lever - 1 -.