Remote Control Unlock Handle

Remote Control Unlock Handle

• The removal and installation procedure is described on left the remote control unlock handle. Removal and installation is similar on the right remote control unlock handle.

Removing






- Remove the bolt - 4 -.

- Remove the remote control unlock handle with handle molding - 1 -.

- Disengage control cable bracket - 2 - at remote release handle - 1 -.

- Disengage the release cable - 3 - at the remote control unlock handle - 1 -.

- Remove the remote control unlock handle with handle molding - 1 -.

Installing

Install in reverse order of removal. Note the following:

- It is not necessary to adjust the release cable.

For the correct tightening specification, refer to => [ Remote Release Overview ] Remote Release Overview