Diagram 87/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine control module, EVAP canister purge regulator valve 1, Left electrohydraulic engine mount solenoid valve, Fuel metering valve, Intake air switch-over valve, Fuel metering valve 2, Leak detection pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J623 - Engine control module Control Modules in Front Part Of Vehicle

N80 - EVAP canister purge regulator valve 1 Engine Management Systems Locations

N144 - Left electrohydraulic engine mount solenoid valve

N290 - Fuel metering valve Engine Management Systems Locations

N335 - Intake air switch-over valve 4.2L CAUA Overviews

N402 - Fuel metering valve 2 4.2L CAUA Overviews

T17q - 17-pin connector, red Overview Of Connector Stations

T60 - 60-pin connector Locations

T94 - 94-pin connector Locations

V144 - Leak detection pump Locations

(131) - Ground connection 2 (in engine compartment wiring harness)

(D111) - Connection (9) (in engine compartment wiring harness)

* - Only for vehicles with US equipment

Previous Diagram 87/7 (Tracks 71-84)

Next Diagram 87/9 (Tracks 99-112)