Exhaust System: Specifications
Fastener Tightening Specifications
Left Exhaust Manifold, Tightening Specifications and Sequence
• Replace the exhaust manifold nuts.
• Coat the thread on the nut with hot bolt paste; for the correct hot bolt paste refer to the Electronic Parts Catalog (ETKA).
- Tighten the nuts in 3 steps according to the tightening sequence:
Right Exhaust Manifold, Tightening Specifications and Sequence
• Replace the exhaust manifold nuts.
• Coat the thread on the nut with hot bolt paste; for the correct hot bolt paste refer to the Electronic Parts Catalog (ETKA).
- Tighten the nuts in 3 steps according to the tightening sequence:
Individual Catalytic Converter Mounting Components.
1. Nut - 23 Nm
2. Spacer sleeve
3. Pressure spring
4. Washer
5. Bolt
6. Bolt - 23 Nm
7. Spacer sleeve
8. Adjusting buffer
9. Tab
10. Bolt - 23 Nm
11. Bracket