High Tone and Low Tone Horns

High Tone and Low Tone Horns

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing





- Switch off ignition and remove ignition key.

- Remove the appropriate front wheel housing liner.

- Remove the nut - 2 -.

- Remove the signal horn - 3 - from the bracket.

- Disconnect the electrical connector - 1 -.

Installing

• Tightening specification, refer to => [ Signal Horns Assembly Overview ] Signal Horns Assembly Overview.

Install in reverse order of removal, observing the following:

- Install front wheel housing liner.