Operation CHARM: Car repair manuals for everyone.

3.0L CCBA/CGXC Overview







Component Locations: Engine Management Systems

3.0L CCBA/CGXC Overview


Engine Compartment Right





1 Ignition Coils, Cylinder Bank 1
Ignition Coil 1 with Power Output Stage -N70-
Ignition Coil 2 with Power Output Stage -N127-
Ignition Coil 3 with Power Output Stage -N291-
2 Heated Oxygen Sensor (HO2S) -G39- => [ 3.0L CCBA/CGXC Exhaust Overview ] Locations
3 Camshaft Adjustment Valve 1 -N205- => [ Cylinder Bank 1 (Right) ] See Image Below.
4 Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) -G130- => [ 3.0L CCBA/CGXC Exhaust Overview ] Locations
5 Secondary Air Injection Sensor 1 -G609-
6 Secondary Air Injection (AIR) Solenoid Valve -N112- => [ Installed Location on the Back of the Engine ] See Image Below.
7 Intake Air Temperature (IAT) Sensor -G42- / Manifold Absolute Pressure (MAP) Sensor -G71- => [ Installed Location on the Back of the Engine ] See Image Below.
8 Intake Manifold Runner Control (IMRC) Valve -N316- => [ Installed Location on the Back of the Engine ] See Image Below.
9 Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 -N80- => [ EVAP System Assembly Overview ] Locations
10 Secondary Air Injection (AIR) Solenoid Valve 2 -N320- => [ Installed Location on the Back of the Engine ] See Image Below.
Engine Compartment Right continued





11 - Control Valve Control Module -J808- => [ Control Valve Control Module ] See Image Below.

12 - Throttle Valve Control Module -J338- => [ Throttle Valve Control Module ] See Image Below.
Integrated with Throttle Drive (for Electronic Power Control (EPC)) -G186- ,Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) -G187- , and Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) -G188-

13 - Knock Sensor (KS) 1 -G61- => [ Under the Intake Manifold, Cylinder Bank 1 (Right) ] See Image Below.

14 - Fuel Injectors, Cylinder Bank 1 => [ Under the Intake Manifold, Cylinder Bank 1 (Right) ] See Image Below.
Cylinder 1 Fuel Injector -N30-
Cylinder 2 Fuel Injector -N31-
Cylinder 3 Fuel Injector -N32-

15 - Intake Manifold Runner Position Sensor -G336- => [ Intake Manifold Runner Position Sensor 2 ] See Image Below.

16 - Camshaft Position (CMP) Sensor -G40- => [ Cylinder Bank 1 (Right) ] See Image Below.

17 - Charge Air Pressure Sensor -G31- / Intake Air Temperature (IAT) Sensor -G72- => [ Charge Air Pressure Sensor / Intake Air Temperature (IAT) Sensor ] See Image Below.

18 - Fuel High Pressure Pump => [ Component Location on the High Pressure Pump ] See Image Below.
Fuel Metering Valve -N290-
Low Fuel Pressure Sensor -G410-

19 - Secondary Air Injection (AIR) Pump Motor -V101- => [ Secondary Air Injection (AIR) Pump ] See Image Below.

Engine Compartment Left





1 Fuel Pressure Sensor -G247- => [ Electrical Connectors on Left Rear of Engine ] See Image Below.
2 Knock Sensor (KS) 2 -G66- => [ Under the Intake Manifold, Cylinder Bank 2 (Left) ] See Image Below.
Connector location => [ Electrical Connectors on Left Rear of Engine ] See Image Below.
3 Fuel Injectors, Cylinder Bank 2 => [ Under the Intake Manifold, Cylinder Bank 2 (Left) ] See Image Below.
Cylinder 4 Fuel Injector -N33-
Cylinder 5 Fuel Injector -N83-
Cylinder 6 Fuel Injector -N84-
4 Reduced Oil Pressure Switch -F378- => [ Reduced Oil Pressure Switch ] See Image Below.
5 Control Valve Control Module -J808- => [ Control Valve Control Module ] See Image Below.
6 Secondary Air Injection (AIR) Solenoid Valve -N112- => [ Installed Location on the Back of the Engine ] See Image Below.
7 Intake Air Temperature (IAT) Sensor -G42- / Manifold Absolute Pressure (MAP) Sensor -G71- => [ Installed Location on the Back of the Engine ] See Image Below.
8 Intake Manifold Runner Control (IMRC) Valve -N316- => [ Installed Location on the Back of the Engine ] See Image Below.
9 Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 -N80- => [ EVAP System Assembly Overview ] Locations
10 Secondary Air Injection (AIR) Solenoid Valve 2 -N320- => [ Installed Location on the Back of the Engine ] See Image Below.
Engine Compartment Left continued





11 - Oil Pressure Switch -F22- => [ Installed Location on the Engine ] See Image Below.

12 - Engine Speed (RPM) Sensor -G28- => [ Engine Speed (RPM) Sensor ] See Image Below.

13 - Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) -G131- => [ Oxygen Sensors Location, Cylinder Bank 2 (Left) ] Locations

14 - Camshaft Adjustment Valve 2 -N208- => [ Cylinder Bank 2 (Left) ] See Image Below.

15 - Heated Oxygen Sensor (HO2S) 2 -G108- => [ Oxygen Sensors Location, Cylinder Bank 2 (Left) ] Locations

16 - Engine Control Module (ECM) -J623- => [ Location of Engine Control Module ] See Image Below.

17 - Ignition Coils, Cylinder Bank 2
Ignition Coil 4 with Power Output Stage -N292-
Ignition Coil 5 with Power Output Stage -N323-
Ignition Coil 6 with Power Output Stage -N324-

18 - Oil Pressure Regulation Valve -N428- => [ Oil Pressure Regulation Valve ] See Image Below.

19 - After-Run Coolant Pump -V51- Locations

20 - Intake Air Temperature (IAT) temperature Sensor 2 -G430- / Charge Air Pressure Sensor 2 -G447- => [ Charge Air Pressure Sensor / Intake Air Temperature (IAT) Sensor ] See Image Below.

21 - Camshaft Position (CMP) Sensor 2 -G163- => [ Cylinder Bank 2 (Left) ] See Image Below.

22 - Intake Manifold Runner Position Sensor 2 -G512- => [ Intake Manifold Runner Position Sensor 2 ] See Image Below.

23 - Engine Coolant Temperature (ECT) Sensor -G62- => [ Engine Coolant Temperature (ECT) Sensor ] See Image Below.


Charge Air Cooling Pump






1 - Charge Air Cooling Pump -V188- connector

Location of Engine Control Module






Engine Control Module (ECM) -J623-

In left e-box in engine compartment


Installed Location on the Engine






1 - To Knock Sensor 1 -G61-
2 - To the fuel injectors, cylinder bank 1
3 - Oil Pressure Switch -F22-

Electrical Connectors on Left
Rear of Engine







1 - To cylinder bank 2 fuel injectors and to Fuel Pressure Sensor -G247-
2 - To Knock Sensor 2 -G66-

Installed Location on the Back
of the Engine







1 - Secondary Air Injection (AIR) Solenoid Valve -N112-
2 - Intake Manifold Runner Control (IMRC) Valve -N316-
3 - Secondary Air Injection (AIR) Solenoid Valve 2 -N320-
Back of the engine on the compressor


Installed Location on the Back
of the Engine







1 - Intake Air Temperature (IAT) Sensor -G42- / Manifold Absolute Pressure (MAP) Sensor -G71-
Back of the engine on the compressor


Evaporative Emission Canister Purge Regulator
Valve







3 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 -N80-

Throttle Valve Control Module






Throttle Valve Control Module -J338-
Back of the engine on the compressor


Control Valve Control Module






3 - Control Valve Control Module -J808-
Back of the engine on the compressor


Cylinder Bank 1 (Right)






1 - Camshaft Adjustment Valve 1 -N205-
2 - Camshaft Position (CMP) Sensor -G40-

Cylinder Bank 2 (Left)






1 - Camshaft Position (CMP) Sensor 2 -G163-
2 - Camshaft Adjustment Valve 2 -N208-

Under the Intake Manifold,
Cylinder Bank 1 (Right)







1 - Cylinder 1 Fuel Injector -N30-
2 - Cylinder 2 Fuel Injector -N31-
3 - Cylinder 3 Fuel Injector -N32-
4 - Knock Sensor 1 -G61-

Under the Intake Manifold,
Cylinder Bank 2 (Left)







1 - Cylinder 6 Fuel Injector -N84-
2 - Cylinder 5 Fuel Injector -N83-
3 - Cylinder 4 Fuel Injector -N33-
4 - Fuel Pressure Sensor -G247-
5 - Knock Sensor 2 -G66-

Reduced Oil Pressure Switch






1 - Reduced Oil Pressure Switch -F378-

Oil Pressure Regulation Valve






4 - Oil Pressure Regulation Valve -N428-
Left side, underneath on the engine


Intake Manifold Runner Position
Sensor 2







1 - Intake Manifold Runner Position Sensor 2 -G512- and connector
At the front on the left lower section of the intake manifold


Note:
Intake Manifold Runner Position Sensor -G336- is installed as a mirror image


Engine Coolant Temperature
(ECT) Sensor







1 - Engine Coolant Temperature (ECT) Sensor -G62-
At front on engine


Component Location on the High
Pressure Pump







1 - Low Fuel Pressure Sensor -G410-
2 - Fuel Metering Valve -N290-
At right side of the cylinder head


Engine Speed (RPM) Sensor






2 - Engine Speed (RPM) Sensor -G28-
Installed in the transmission housing from behind


Charge Air Pressure Sensor
/ Intake Air Temperature (IAT) Sensor








Note:
The Intake Air Temperature (IAT) temperature Sensor 2 -G430- / Charge Air Pressure Sensor 2 -G447- are arranged as mirror image of each other

1 - Charge Air Pressure Sensor -G31- / Intake Air Temperature (IAT) Sensor -G72-
On the right side, on the compressor with the charge air cooler


Oil Level Thermal Sensor






Oil Level Thermal Sensor -G266-

Located in bottom of oil pan


Secondary Air Injection (AIR)
Pump







Secondary Air Injection (AIR) Pump Motor -V101-

Not installed on all vehicles