Diagram 87/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oxygen sensor after three way catalytic converter, Oxygen sensor 2 after catalytic converter, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Oxygen sensor after three way catalytic converter Locations

G131 - Oxygen sensor 2 after catalytic converter Locations

J623 - Engine control module Control Modules in Front Part Of Vehicle

ST1 - Fuse panel 1

SB9 - Fuse 9 (on fuse panel B) Overview Of Fuses

T4l - 4-pin connector, black

T4m - 4-pin connector, brown

T94 - 94-pin connector Locations

Z29 - Heater for oxygen sensor 1 after catalytic converter

Z30 - Heater for oxygen sensor 2 after catalytic converter

(D107) - Connection (5) (in engine compartment wiring harness)

Previous Diagram 87/20 (Tracks 253-266)

Next Diagram 87/22 (Tracks 281-294)