Clutch Module Overview

Clutch Module Overview

• Clutch module - 2 -.






A - Alignment Pins

• Not on all vehicles

• The alignment pins - A - (if equipped) must lock in the hole - B - when attaching the clutch module - 2 - to the drive plate - 1 -.

B - Alignment Bore

• The alignment pins - A - (if equipped) must lock in the hole - B - when attaching the clutch module - 2 - to the drive plate - 1 -.


The clutch will not function properly if it is not installed correctly.

• The clutch may have noticeable function problems if the alignment pins for the drive plate - A - are not inside the hole in the clutch module - B -.

1 - Drive Plate

• 6 holes with threaded sleeves

• With needle bearing

2 - Clutch Module

• With transfer plate

• Components: Dual mass flywheel, clutch plate and clutch pressure plate

3 - Bolt

• Always replace

• 60 Nm

• For mounting the dual flywheel to the drive plate

• Quantity: 6

• Follow the tightening sequence, refer to => [ Clutch Module to Drive Plate, Tightening Sequence ] Clutch Module to Drive Plate, Tightening Sequence