Roof Panel Trim

Roof Panel Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Removing






- Remove the rear roof panel trim - 1 - using the trim removal wedge (3409).

Installation

Install in reverse order of removal. Note the following:

• If trim clamps remain in body mounting points, remove these and insert them in trim.

• Check clamps for damage or deformation, replace if necessary.

- First insert the centering tabs - 2 - on the rear roof panel trim - 1 - into the mount.






- Push outer clip - 3 - into mounting. Then press in remaining clamps.

- Stretch the rear lid seal - 2 - over the rear roof panel trim - 1 -.