Alignment: Specifications
WHEEL ALIGNMENT SPECIFICATIONSNote: Given specifications are for car loaded down to normal position. Refer to Inspection Conditions Testing and Inspection
Track width, mm (in) 1384 (54.488)
Height (lower edge of wheel house to rim flange
at center of wheel), mm (in) 546 ± 8 (21.496 ± 0.315)
Front Axle
Total toe
Deg. 0°14' (+9'/-4')
mm 1.5 (+1.0/-0.5)
inches 0.060 (+0.040/-0.020)
Camber angle, Deg. [1] 0° ± 30'
Toe difference, Deg. [1]
with 20° inside wheel lock 0°45' ± 30'
King pin angle, Deg. [1] 10°54' ± 30'
Caster angle, Deg. [1] 8°20' ± 30'
Front wheel displacement, Deg. 0° ± 15'
Max. Wheel Lock, Deg.
Inside Wheel
Left approx. 41.2°
Right approx. 40.4°
Outside Wheel
Left approx. 36.1°
Right approx. 35.5°
Turning circle diameter, m (ft)
Left approx. 10.20 (33.4)
Right approx. 10.40 (34.1)
Rear Axle
Total toe
Deg. 0°20' ± 8'
mm (in) 2 ± 0.8 (0.080 ± 0.031)
with TRX 415 wheels, mm (in) 2.4 ± 0.8 (0.094 ± 0.031)
Camber angle, Deg. [1] -2°22' ± 30'
[1] Maximum deviation (left to right) 30'