Computers and Control Systems: Technical Service Bulletins

• Recalls
  • Emissions
    • Recall - Idle Control Unit Exchange
  • Generals
    • Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
• Customer Interest
  • Engine - Idle and Driveability Complaints
  • Engine - Hesitation/Poor Throttle Response
    • Overview
    • Repair Procedure:
    • Repair Procedure For Units With A Code of 341 or Earlier
    • Warranty Status:
• By Symptom
  • Abnormal wear/deterioration
    • Recall - Idle Control Unit Exchange
    • Battery - Jump Starting and Charging Precautions
  • Customer Interest
    • Engine - Idle and Driveability Complaints
    • Engine - Hesitation/Poor Throttle Response
      • Overview
      • Repair Procedure:
      • Repair Procedure For Units With A Code of 341 or Earlier
      • Warranty Status:
  • Driveability
    • Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
    • Engine - Hesitation/Poor Throttle Response
      • Overview
      • Repair Procedure:
      • Repair Procedure For Units With A Code of 341 or Earlier
      • Warranty Status:
    • Recall - Idle Control Unit Exchange
  • False instrument warning light/gauges
    • Oxygen Sensor Service Indicator Light - Service
    • Battery - Jump Starting and Charging Precautions
  • High emissions
    • Recall - Idle Control Unit Exchange
  • Inoperative
    • Battery - Jump Starting and Charging Precautions
  • Recalls
    • Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
    • Recall - Idle Control Unit Exchange
  • Won't turn off
    • Oxygen Sensor Service Indicator Light - Service
• All Technical Service Bulletins
  • Computers, Controls - Programming VS Veh. Data Status
  • Compuetrs/Controls - Recommended Diagnostic Procedures
  • Computers - ISTA Diagnosis On Vehicles Prior To E46
  • Computers/Control - Loading/Activation Of Enabling Codes
  • Updated MoDic(R) Diagnostic Software - D12.0
  • Updated MoDic(R) Software - P11.0 Programming
    • Overview
    • Program Highlights
    • Flash Programming Features
    • Programming the Control Module
      • Overview
      • 1. Determine Customer Service Measures
      • 2. Exchange Control Module
      • 3. Exchange EPROM
      • 4. Adjustment EWS - DME Vehicles From 1/95
      • 5. Clear Adaptation Values
    • Diskette Contents
    • How to Load V11.0 Software With MODIC Station
    • Label Printing
    • Prerequisites For Programming
    • Parts Information
  • Service Tester - Revised and Expanded Software
    • Overview
    • Important Program Additions
    • Fundamental Structure of the Diagnostic Program
    • Control Unit Survey
    • Control Unit Identification
    • 1 = Read Fault Memory
    • 2 = Status Requests
    • 3 = Activate Components
    • 4 = Test Sequence - Example From Instrument Cluster
    • 5 = Special Functions - Example From Instrument Cluster
    • 6 = Output Test Code
    • 9 = Clear Fault Memory
  • Emission System - Descriptions/Operation
    • Overview
    • Motronic
      • Overview
      • Input Signals to the Motronic
        • Engine Speed
        • Reference Mark Signal
        • Airflow
        • Intake Air Temperature
        • Engine Temperature
        • Battery Voltage
        • Throttle Valve Position
        • Start Information
        • O2 Signal
        • Mixture Preparation
    • Idle-RPM Control System
    • Ignition
    • Function of ECU - Fuel Injection
    • Function of ECU - Ignition
    • Emission Control System
    • Oxygen Sensor
    • Catalytic Converter
    • Evaporative Control System
    • Crankcase Emission Control System
    • Service Warning System
    • Adjustment of CO
    • Technical Data-BMW 528E
    • Technical Data-BMW 733I/633CSI
  • Updated MoDic(R) Software - P8.0 Programming
    • Overview
    • Engine Control Module Flash Programming Features
    • Programming the Control Module
      • Overview
      • 2. "Exchange Control Module"
      • 3. "Exchange EPROM"
      • 4. "Adjustment EWS - DME Vehicles From 1/95"
      • 5. "Clear Adaptation Values"
    • How to Load V8.0 Software With the Modic Station
    • Label Printing
    • Prerequisites For Programming
  • New Special Tool - MoDic(R) Replacement Cable
  • Electrical/Electronic Systems - Troubleshooting Hints
    • Overview
    • Verify the Complaint and Verify the Complaint Is A Malfunction
    • Systematic Troubleshooting
    • Inputs, Processing, and Outputs
    • Common Sense Hints
  • Electronics/Computers - Static Protection Kit
  • Engine - Idle and Driveability Complaints
  • Engine Controls - Electronically Regulated Idle Speed
  • Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
  • Engine - Hesitation/Poor Throttle Response
    • Overview
    • Repair Procedure:
    • Repair Procedure For Units With A Code of 341 or Earlier
    • Warranty Status:
  • Oxygen Sensor Service Indicator Light - Service
  • Special Tools - Simulator Tool For Bosch Oxygen Sensors
    • Overview
    • Individual Parts of the Simulator
    • Operator Control/ Panel of Simulator
    • Connecting the Simulator
    • Test 1: Oxygen Sensor Testing
    • Test 2: Oxygen Sensor Voltage
    • Test 3: Simulation of Probe Voltage
  • Engine - Idle Speed Control System Description
  • Recall - Idle Control Unit Exchange
  • Battery - Jump Starting and Charging Precautions