Disassembling/Assembling Alternator

DISASSEMBLING/ASSEMBLING ALTERNATOR - Alternator Removed -

Alternator 80 A:





- Remove voltage regulator 12 32 000.
- Hold pulley with Special Tool 12 31 000 and unscrew nut.
- Take off fan.





- Arrangement of Washers.





- Mark housing sections to each other Unscrew bolts and pull housing sections apart.





- Unscrew bearing cap screws and take off end plate.





- Unscrew screws for diode plate.





- Unscrew shielded capacitor. Unscrew nuts on B + and D + terminals. Remove diode plate with stator coil.

Installation Note:





- Check condition of insulating sleeves and washers, replacing if necessary.