ECM Replacement Procedures

REMOVING, INSTALLING OR REPLACING ON-BOARD COMPUTER

1. Lift out radio mask. You may need to remove the radio.

2. Open glove box. Pull out pins on both retaining straps.

3. Unscrew screws and pull down cover.

4. Pull off wire plug and remove cover.

5. Unscrew screws and remove cover.

6. Unscrew screws and take out on-board computer.

7. Pull out slider and pull off plug.

8. Compress retainers and pull out plug.
This will be used on the replacement computer.

9. Reverse procedure to install.