Replacing Printed Circuit Board For Service Indicator

Replacing Printed Circuit Board For Service Indicator:

- Remove instrument carrier assembly.
Instrument Carrier - Removing and Installing

Instrument Carrier for Cars with Automatic Transmission:



- Pull off plugs for indicator lamps.




- Pull out coding plug (1).

Note: Check coding plug identification.




- Unscrew screw.
- Take off instrument carrier housing.

Caution! Never touch printed circuit board with bare fingers

Installation:
- Insert indicator lamp windows.




- Remove speedometer and clock or tachometer with fuel consumption gauge.

Installation:
- Check for correct fit of lugs in plug on printed circuit board.




- Pull off plugs (1 and 2).




- Replace printed circuit board with cover.

Note: Transfer light bulbs for indicator lamps. if applicable.