Removing and Installing Throttle Housing

REMOVING AND INSTALLING THROTTLE HOUSING





- Disconnect cables (1...3).
1 = Automatic transmission
2 = Accelerator pedal
3 = Cruise control

Installation Note:
- Adjust cables.





- Disconnect water hoses (1 and 2).
- Disconnect air hoses (3 and 4).

Installation Note:
- Fill and bleed cooling system.





- Pull off multiple pin plug (1) on throttle switch.
- Pull off vacuum hose (2).





- Unscrew nuts (1 ... 4) and take off throttle housing. (Nut 4 is not visible)

Installation Note:





- Replace gasket (1).





- Unscrew bolts (1).
- Remove throttle switch (2).

Installation Note:
- Adjust throttle switch.





- Unscrew bolts (1) and take off cover (2).

Installation Note:





- Replace gasket (1).
- Check Engine Idle Speed and CO level.