Removing and Installing 0C (32F) Temp. Switch

REMOVING AND INSTALLING 0°C (32°F) TEMPERATURE SWITCH





- Unscrew screws (1).
- Unscrew screws (2) on left and right sides.
- Pull off rubber guard.
- Fold cover forward.





- Pull off plug (1).
- Unscrew temperature switch.

Installation Note:
- Torque: max. 30 Nm (22 ft. lbs.).

Installation Note:





- Check code number (1) and switching point (2).

Checking:





- Connect ohmmeter (M 06) on temperature switch.
- Ohmmeter should display about 0 ohm with temperature < -8°C (+ 18°F).
- Ohmmeter should display about infinite ohms with temperature > 4°C (39°F).