Computers and Control Systems: Technical Service Bulletins
- Recalls
- Customer Interest
- By Symptom
- All Technical Service Bulletins
- Computers, Controls - Programming VS Veh. Data Status
- Compuetrs/Controls - Recommended Diagnostic Procedures
- Computers - ISTA Diagnosis On Vehicles Prior To E46
- Computers/Control - Loading/Activation Of Enabling Codes
- On-Board Computer - Stop Watch Function Inoperative
- Updated MoDic(R) Diagnostic Software - D12.0
- Updated MoDic(R) Software - P11.0 Programming
- MoDic(R) - Loss of Program
- Tools - Service-Tester Universal Adapter
- Diagnostic Module For Service Tester - Leasing Program
- Service Tester - Revised and Expanded Software
- Overview
- Important Program Additions
- Fundamental Structure of the Diagnostic Program
- Control Unit Survey
- Control Unit Identification
- 1 = Read Fault Memory
- 2 = Status Requests
- 3 = Activate Components
- 4 = Test Sequence - Example From Instrument Cluster
- 5 = Special Functions - Example From Instrument Cluster
- 6 = Output Test Code
- 9 = Clear Fault Memory
- Updated MoDic(R) Software - P8.0 Programming
- New Special Tool - MoDic(R) Replacement Cable
- Electrical/Electronic Systems - Troubleshooting Hints
- Electronics/Computers - Static Protection Kit
- Fuel - Idle Speed Varies/Deviates From Specifications
- Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
- ECM - Ordering Information For Reference Chart
- Special Tools - Simulator Tool For Bosch Oxygen Sensors
- Engine - Idle Speed Control System Description
- Engine Controls - Intermittent No Start, New Main Relay
- Recall - Idle Control Unit Exchange