Locks: Testing and Inspection

CENTRAL LOCKING

TROUBLESHOOTING HINTS

1. Check Fuse 27 by operating the On Board Computer.


SYSTEM CHECK
^ Operate controls in sequence listed in the System Check Table.
^ Refer to Repair Action for the Response received (tests follow the System Check Table).
^ After any repair, repeat System Check to verify proper system operation.

NOTE: Before replacing any system component, check all connectors, splices, and wiring to that component.

System Check Table:

System Check Table (cont'd):

System Check Table (cont'd):

^ If all results are normal, the system is OK.


SYSTEM DIAGNOSIS
^ Do the following tests when directed by the System Check Table.

A : Table 1:

A : Table 2:

A : Table 3:

B:

C: