Computers and Control Systems: Technical Service Bulletins

• Recalls
  • Emissions
    • Recall - Updated EPROM, Lower Emissions
      • Overview
      • Parts Information:
      • Corrective Procedure:
      • Label Instructions:
      • Warranty Status:
      • Preparatory Instructions
      • Procedure:
  • Generals
    • Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
      • Overview
      • Summary, Detail Procedure & Parts Information
      • Warranty Status & Summary Updates Information
• Customer Interest
  • Engine - MIL ON/Rough Running/Poor Driveability
  • Engine - Poor Driveability/Rough Running/MIL ON
  • Radio - High Frequency Interference
  • Fuel - Idle Speed Varies/Deviates From Specifications
  • Engine Controls - Intermittent No Start, New Main Relay
  • Engine - No Start, MIL ON, Fuse No. 10 Blown
• By Symptom
  • Abnormal wear/deterioration
    • Engine Controls - Lambda Control System Troubleshooting
  • Customer Interest
    • Engine - MIL ON/Rough Running/Poor Driveability
    • Engine - Poor Driveability/Rough Running/MIL ON
    • Radio - High Frequency Interference
    • Fuel - Idle Speed Varies/Deviates From Specifications
    • Engine Controls - Intermittent No Start, New Main Relay
    • Engine - No Start, MIL ON, Fuse No. 10 Blown
  • Driveability
    • Engine - MIL ON/Rough Running/Poor Driveability
    • Engine - Poor Driveability/Rough Running/MIL ON
    • Electrical - Check Engine, Temp Gauge, Long Crank, Idle
    • Fuel - Idle Speed Varies/Deviates From Specifications
    • Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
      • Overview
      • Summary, Detail Procedure & Parts Information
      • Warranty Status & Summary Updates Information
    • Engine Controls - Lambda Control System Troubleshooting
  • False instrument warning light/gauges
    • Engine - MIL ON/Rough Running/Poor Driveability
    • Engine - Poor Driveability/Rough Running/MIL ON
    • Electrical - Check Engine, Temp Gauge, Long Crank, Idle
  • High emissions
    • Recall - Updated EPROM, Lower Emissions
      • Overview
      • Parts Information:
      • Corrective Procedure:
      • Label Instructions:
      • Warranty Status:
      • Preparatory Instructions
      • Procedure:
  • Noise
    • Radio - High Frequency Interference
  • Recalls
    • Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
      • Overview
      • Summary, Detail Procedure & Parts Information
      • Warranty Status & Summary Updates Information
    • Recall - Updated EPROM, Lower Emissions
      • Overview
      • Parts Information:
      • Corrective Procedure:
      • Label Instructions:
      • Warranty Status:
      • Preparatory Instructions
      • Procedure:
  • Starting problems
    • Electrical - Check Engine, Temp Gauge, Long Crank, Idle
    • Engine Controls - Lambda Control System Troubleshooting
    • Engine Controls - Intermittent No Start, New Main Relay
    • Engine - No Start, MIL ON, Fuse No. 10 Blown
• All Technical Service Bulletins
  • Computers, Controls - Programming VS Veh. Data Status
  • Compuetrs/Controls - Recommended Diagnostic Procedures
  • Computers - ISTA Diagnosis On Vehicles Prior To E46
  • Computers/Control - Loading/Activation Of Enabling Codes
  • Engine - MIL ON/Rough Running/Poor Driveability
  • Engine - Poor Driveability/Rough Running/MIL ON
  • Fuel Injection - Motronic M 1.1 Description
    • Overview
    • Diagnostic System Description
    • Control Unit
    • Input Signals
    • Half Sequential Fuel Injection
    • Cold Starting
    • Adaptive Idle Speed Regulation System
    • Adaptive Lambda Control System
    • Evaporative Emission Control System
    • Emergency Running Abilities
  • Updated MoDic(R) Diagnostic Software - D12.0
  • Updated MoDic(R) Software - P11.0 Programming
    • Overview
    • Program Highlights
    • Flash Programming Features
    • Programming the Control Module
      • Overview
      • 1. Determine Customer Service Measures
      • 2. Exchange Control Module
      • 3. Exchange EPROM
      • 4. Adjustment EWS - DME Vehicles From 1/95
      • 5. Clear Adaptation Values
    • Diskette Contents
    • How to Load V11.0 Software With MODIC Station
    • Label Printing
    • Prerequisites For Programming
    • Parts Information
  • MoDic(R) - Loss of Program
  • Tools - Service-Tester Universal Adapter
  • MoDic(R) - Has Become A Mandatory Tool
  • Service Tester - Software Revision
  • Electrical - Check Engine, Temp Gauge, Long Crank, Idle
  • Service Tester - Revised and Expanded Software
    • Overview
    • Important Program Additions
    • Fundamental Structure of the Diagnostic Program
    • Control Unit Survey
    • Control Unit Identification
    • 1 = Read Fault Memory
    • 2 = Status Requests
    • 3 = Activate Components
    • 4 = Test Sequence - Example From Instrument Cluster
    • 5 = Special Functions - Example From Instrument Cluster
    • 6 = Output Test Code
    • 9 = Clear Fault Memory
  • Diagnostic Module - Troubleshooting Manual
  • Updated MoDic(R) Software - P8.0 Programming
    • Overview
    • Engine Control Module Flash Programming Features
    • Programming the Control Module
      • Overview
      • 2. "Exchange Control Module"
      • 3. "Exchange EPROM"
      • 4. "Adjustment EWS - DME Vehicles From 1/95"
      • 5. "Clear Adaptation Values"
    • How to Load V8.0 Software With the Modic Station
    • Label Printing
    • Prerequisites For Programming
  • Updated MoDic(R) Software - C9.0 ZCS Coding
    • Overview
    • How to Load C9.0 Software With the MODIC Station
    • Label Printing
  • Updated MoDic(R) Software - P9.0 Programming
    • Overview
    • Flash Programming Features
    • Programming the Control Module
      • Overview
      • 1. "Determine Customer Service Measures"
      • 2. "Exchange Control Module"
      • 3. "Exchange EPROM"
      • 4. "Adjustment EWS - DME Vehicles From 1/95
      • 5. "Clear Adaptation Values"
    • How to Load V9.0 Software With the MODIC Station
    • Label Printing
    • Prerequisites For Programming
  • TIS - Software Update 12/96
    • Overview
    • TIS Loading Instructions For DIS Tester
    • TIS Loading Instructions For EPC/TIS Server
    • Proper Care of CDs
      • Overview
      • CD Return Procedure
  • New Special Tool - MoDic(R) Replacement Cable
  • Instruments - Voltage Surges, Check Engine Light Circuit
  • Electrical/Electronic Systems - Troubleshooting Hints
    • Overview
    • Verify the Complaint and Verify the Complaint Is A Malfunction
    • Systematic Troubleshooting
    • Inputs, Processing, and Outputs
    • Common Sense Hints
  • Electronics/Computers - Static Protection Kit
  • Radio - High Frequency Interference
  • Fuel - Basic Idle Speed and Mixture Setting Warning
  • Fuel - Idle Speed Varies/Deviates From Specifications
  • Campaign - Rough Idle, Low Idle, Idle Speed Fluctuates
    • Overview
    • Summary, Detail Procedure & Parts Information
    • Warranty Status & Summary Updates Information
  • ECM - Ordering Information For Reference Chart
  • Recall - Updated EPROM, Lower Emissions
    • Overview
    • Parts Information:
    • Corrective Procedure:
    • Label Instructions:
    • Warranty Status:
    • Preparatory Instructions
    • Procedure:
  • ECM - Motronic Control Units Identification
  • Engine Controls - Lambda Control System Troubleshooting
  • Special Tools - Simulator Tool For Bosch Oxygen Sensors
    • Overview
    • Individual Parts of the Simulator
    • Operator Control/ Panel of Simulator
    • Connecting the Simulator
    • Test 1: Oxygen Sensor Testing
    • Test 2: Oxygen Sensor Voltage
    • Test 3: Simulation of Probe Voltage
  • Engine Controls - Intermittent No Start, New Main Relay
  • Engine - No Start, MIL ON, Fuse No. 10 Blown