Throttle Position Switch: Adjustments

ADJUSTING THROTTLE SWITCH

Checking Throttle Switch:





- There should be approximately 0 ohm between connections (2 and 18) with the throttle closed.
- With the throttle wide open there should be approximately 0 ohm between connections (3 and 18).
LL = Idle
VL = Full load

Adjusting
- There should be approximately 0 ohm between Connections (2 and 18) with the throttle closed.
- Adjust by loosening screws (1) and turning the throttle switch.
- Open throttle after finishing adjustment - resistance should rise immediately to infinite ohms.
- When releasing the throttle the resistance should drop back to approximately 0 ohm.