Fuel Pump: Service and Repair

REMOVING AND INSTALLING FUEL PUMP





- Push back protective caps (1).
- Unscrew nuts (2 and 3) and take off wires.





- Pinch suction hose (1) and pressure hose (2) with Special Tool 13 3 010.
- Loosen hose clamps (3) and pull off hoses.
Note: Do not use squeeze hose clamps on pressure hose.





- Unscrew bolt (1) and nuts (2).
- Take off fuel pump with filter.





- Unscrew bolt (1) and take off clamp.





- Loosen hose clamp (1) on fuel filter and pull off fuel hose.
- Remove rubber ring (2).

Installation Note:

- Check direction of flow IN and OUT are marked on filter.
- Do not use a squeeze hose clamp.





- Loosen hose clamp (1) on fuel pump and pull off fuel hose.
- Pull off rubber ring (3).
- 2 Code number

Installation Note:





- Check code number (1).