Rear

- Remove rear wheels.



- Press off plastic caps (1).
- Pull off right side brake pad wear indicator plug (arrow).



- Unscrew guide bolts (2).

Installation note:
- Check condition of guide bolts and threads, replacing guide bolts if necessary.
- Tightening torque: 30-35 Nm (22-25 ft lb).




- Press out clip (3).
- Pull off caliper toward rear.



- Remove outer brake pad.
- Inner brake pad is located in piston (small arrow) with a spring.

Installation note:
- Push back piston completely.

- Reverse procedure to install.

NOTE: For additional information see Removal, and Installation Notes. Fundamentals and Basics