Air Bag Control Module: Service and Repair

WARNING: Review Service Precautions. Improper handling could cause activation of the airbag(s) and lead to injuries!

REMOVE
- Disconnect battery and cover negative pole or terminal.
- A waiting period of approximately 5 minutes should be observed before beginning electrical work to allow the capacitor charge to dissipate.





- Remove lower steering column trim section.
- Disconnect plug connection for airbag (orange).





- Open glove box.
- Pull off cover (1).





- Lift out retainer (1).
- Pull out pin (2) of both retaining straps.





- Disconnect plugs (orange).
- Unscrew bolts.
- Disconnect ground wire on central ground point.
- Remove control module.

INSTALL
- Install in reverse order.

NOTE: Arrow on module faces forward.

- Check for possible trouble codes.
- Verify proper system operation.