Adjustment of EWS - DME Vehicles

"Adjustment EWS - DME Vehicles from 1/95"

This step is used to synchronize an EWS and DME control module after the DME has been replaced. If the EWS control module is replaced, it must be coded with V12.0 or later coding software (IDC 1015/95-15).

The software will ask you to

1. Switch ignition on
2. Start adjustment EWS-DME Y/N

If you press "Y" the EWS and DME control modules will automatically be synchronized. If the car does not have EWS, the message "Control Module Not Found" will be displayed.

If you press "N", the software will return to the main menu.

Please refer to TRI 61 01 95 (2144) for complete EWS details.