Installing Exchange Transmission

Installing Exchange Transmission




Remove transmission. Removing and Installing Transmission
IMPORTANT!
- Always clean oil cooler and lines with compressed air and flush twice with ATF before installing an exchange transmission.
- Check transmission code * on data plate. Attach transport holder (1), lever (2) and bracket (3).




- Transfer cross member (3) with rubber mounts and exhaust carrier.




- Transfer adapters (3).
Version with Multiple Internal Threads.
- Unscrew adapters with a 12 mm multiple tooth socket or a Torx T 55 socket.
- Replace seals.
- Tightening torque: Mechanical Specifications