Special Tool - M70 Engine Stand

89BMW08

Group 04 Tools and Equipment
Bulletin Number 04 25 89 (1969) Page 1 of 1
Woodcliff Lake, NJ November 1989 Technical Dept.



Tool Tips

SUBJECT: M70 Engine, Assembly Stand Adaptation

MODEL: All

Situation: The M70 engine stand (88 88 6 001 450) can be adapted, while not holding an M70 engine, to hold the set of alignment sandbags (81 12 9 427 785).

Solution: Cut two lengths from a plank (2" x 8" or a 2" x 10") that are long enough to be laid across the bottom legs of the stand to form a tray (see drawing).

This will help keep the bags clean and mobile.