Throttle Position Switch: Adjustments
Throttle Valve Switch:
THROTTLE SWITCH (MANUAL TRANSMISSION)
1. With the throttle valve switch disconnected connect an ohm meter between pin 2 and pin 18 of the throttle switch.
Throttle Valve:
2. Loosen screws number 1 and turn the throttle switch until 0 ohms is obtained. Retighten the screws.
^ The resistance should rise immediately to infinite ohms when the throttle valve is opened slightly and drop to 0 ohms when the throttle valve returns to the near closed position.
THROTTLE SWITCH (ELECTRO-HYDRAULIC A/T TRANSMISSION)
Pin Designations (Throttle Valve View):
1. With the throttle valve switch disconnected connect an ohm meter between pin 6 and pin 4 of the throttle switch.
Throttle Valve:
2. Loosen screws number 1 and turn the throttle switch until 0 ohms is obtained. Retighten the screws.
^ The resistance should rise immediately to infinite ohms when the throttle valve is opened slightly and drop to 0 ohms when the throttle valve returns to the near closed position.