Water Pump: Service and Repair

REMOVING WATER PUMP






- Hold pulley tight on the drive belt and unscrew bolts.

Installation:
- Tightening torque = 9 Nm (6.5 ft lbs).






- Unscrew bolts.

Installation:
- Tightening torque = 9 Nm (6.5 ft lbs).







- Screw two M-6 bolts in tapped bores (1) and press water pump out of the end cover uniformly.






Installation:
- Replace O-ring and coat with a lubricant.
- Tightening torque = 9 Nm (6.5 ft lbs).