Engine, Cooling and Exhaust: Technical Service Bulletins
- Recalls
- Customer Interest
- By Symptom
- All Technical Service Bulletins
- Engine - Head Bolt Threads Pull Out of Engine Block
- Engine - CPO Engine Inspection Information
- Engine - E Series Engine Oil Capacities
- Engine - Removal/Installation Tips
- Cooling System - Information on Coolant Refilling
- Engine - Identification
- Engine - M42 Description
- Special Tools - New Torque Angle Indicator
- Engine - High Pressure Steam Cleaning Warning
- New Special Tools
- Engine - Hydraulic Lock
- New BMW Special Tools.
- Campaign - Throttle Potentiometer: Code 12/Rough Idle
- Sodium-Filled Valves - Handling/Disposal
- Ignition - Spark Plug Applications
- Ignition - Spark Plug Application
- Ignition - Spark Plug Application Charts
- Ignition - Spark Plug Application Chart
- Spark Plug/Engine Oil Capacity Reference Chart
- 1203851085 - 04/01/91 Adds Information to 1990/10/01
- Crankshaft Holding Tool - Information
- Special Tools - Engine Valve Guide Reamer Set
- Engine - MIL ON/Codes Set/Tapping/Rattling Noise
- Cooling System - Radiator/Knuckle Saver
- Recall - Heater Core Cracking Additional Notice
- Recall 93V015000: Cooling System Pressure
- Intake and Vacuum System - Leak Detector
- Oil Cooler - Vibration and Droning Noise
- Engine Controls - Air Flow Meter Adapter Harness
- Campaign - Air Intake May Contract Under High-Vacuum
- Recall 91V219000: Ice Build-Up in the Intake Tract.
- Emissions - Rotten Egg Smell From Exhaust
- Engine - Oil Capacities and Oil Dipstick Part Numbers
- Valve Cover Gasket - New Design
- Timing Case Profile Gasket - Coolant Leak
- Engine - Oil Recommendations
- Engine - Will Not Start In Cold Weather
- Cooling System - New Antifreeze
- Recall - Coolant System Overheating
- Engine Oil Capacities - All Current Models
- Engine - Oil Capacities
- Fuel System - Damage Caused By Fuel Contaminants
- Cooling System - Proper Cooling System Service Procedure
- Engine - Crankshaft Seal/Bedplate Sealing Information