Convertible Top Control Module: Service and Repair

REPLACING CONTROL UNIT:




- Turn ignition key to "O" position.
- Raise trunk lid.
- Unclip clips (1) and lower trunk trim panel.




- Disconnect plug (1).




- Disengage top storage box lid drive and unlock top storage box lid.




- Disengage top drive.

Installation:
- Position top tensioning bow upright.
- Engage top drive and top storage box lid drive.

Top Closed:
- Unlock top on cowl panel and lift at front end.
- Position top tensioning bow upright and open top storage box lid.

Top Opened:
- Open top storage box lid and lift top out of top storage box.
- Position top tensioning bow upright.





NOTE:
- If top cannot be lifted out of top storage box, engage top drive and run top out of storage box electrically.
- If electric operation is not possible, press top in storage box completely and press out push rod (2) firmly.
- Check top adjustment.




- Unscrew screws and take out control unit.