Defect Code 02

Defect Code 02:

High beam or low beam defective:

1. Are fuses and lamps OK? Are ground connections for lamps OK? Are wires from LKM to the fuses and to the lamps OK? Replace defective part, repair faulty wire.

2. Are fuse, wire and switch OK? Are wires from switch to LKM OK? Replace defective part, repair faulty wire.

3. If a crash and alarm sensor (CAG) is installed! ECE versions: CAG in low beam light circuit. US versions: CAG in high beam light circuit. Continue troubleshooting in accordance with diagnostic procedure 6350.0 or crash and alarm sensor.

4. If all fuses, wires, switches and the crash and alarm sensor are OK, replace LKM.